|

Special Pricing on the following popular sizes!
6' x 6' x 7' 6"H
6' x 8' x 7' 6"H
8' x 8' x 7' 6"H
6' x 10' x 7' 6"H
8' x 10' x 7' 6"H
6' x 12' x 7' 6"H
10' x 10' x 7' 6"H
8' x 12' x 7' 6"H
10' x 12' x 7' 6"H
8' x 14' x 7' 6" H
Indoor or outdoor boxes.
All come standard with your choice of outdoor remote or Penthouse refrigeration.
NOW FEATURING ON ALL OF OUR REMOTE REFRIGERATION SYSTEM FREEZERS:
1. ENERGY SAVING P.S.C., (PERMANENT SPLIT CAPACITOR), MOTORS ON THE ENTIRE REFRIGERATION SYSTEM.
NOT JUST THE CONDENSER, BUT THE EVAPORATOR COIL MOTORS AS WELL.
THEY USE BETWEEN 50% AND 60%LESS ENERGY THAN OUR COMPETITORS NON P.S.C. MOTORS.
50% TO 60% LESS ENERGY MEANS 50% TO 60% LESS MONEY WHILE OPERATING!
For more on energy saving ideas and the importance of P.S.C. motors in energy saving, please visit the link below:
http://www.wisconsingrocers.com/images/Magazine/Energy%20savings%20spring%2003.pdf#search='permanent%20split%20capacitor%20energy%20saving'
ALL PANELS MEET N.S.F. AND U.L. REQUIREMENTS!
Walk in coolers and walk in freezers for storage can be purchased as separate units, or combined as a single unit, with an interior pass-thru door connecting the walk in freezer and walk in cooler sections.
Both walk in coolers and walk in freezers, or combination walk in cooler / walk in freezer units, can be designed for either outdoor or indoor installation of the walk in cooler or walk in freezer boxes, as well as either indoor or outdoor refrigeration systems.
Even with our freezers more powerfull refrigeration systems, and free delivery, we still beat the listed prices of our competitors, who don't even include these standard features in the price they show you! Look and compare.
The standard size of our entrance doors is 34" x 76", but can be custom made to any size without much extra expense.
The standard exterior and interior finish is either Stucco embossed Aluminum, or natural embossed Galvalume both inside and out.
Our freezer using no-wood construction 6" thick stable
R-value EPS insulated freezers can insulate over 7%
better over the long run than our competitors freezers
using 5.5"wood framed "foamed in place"
urethane insulated panels and over 30% better than
freezers using 3.5" wood framed "foamed in place"
insulated panels.
AND WILL NOT ROT OVER TIME AS WOODEN FRAMED
PANELS CAN.
Our competitor's quotes will note that their panels use urethane insulation,
and sometimes includes a questionable claimed R-Value.
Urethanes initial R-value per inch is better than polystyrene:
But what they don't tell you is:
1. Their panels overall R-value, or K-factor.
(The wooden frame portion of their panel has an R-value of only
about R-5, which is much lower than the insulating material, which
is only in the middle of the wooden frame.
Meaning that the panels overall R-value or K-factor is far lower
than the insulating material which is only in the center of the panel. In
other word they are leaving out the low R-value of the wooden frame
portion of the panel when making their R-value claim for the panel)
They are only telling you their "foamed in place" urethane
panels initial urethane portion R-value, not it's "aged R-value"
after "outgassing" has occured, and they are also not telling you the very
low R-value of the wood frame portion of their panel.
2. Stability of the R-value: When urethane is manufactured, the cell gas is
mostly blowing agent, (now Pentane or R-134A), with a low thermal
conductivity.
Because the gas in the cells is lighter than air, it is under constant
pressure from the surrounding atmosphere to escape the cells, much as a
balloon filled with Helium would be.
As the lighter than air gas escapes it is replaced by air and moisture, the
enemy of any insulation. As a result, the high initial R-Value of the
urethane insulation drops, thereby substantially reducing its R-value over
time.
This process, and its lowering effect on urethanes R-Value is know as
"Thermal Drift".
This effect is reduced because of the metal skin but still occurs.
Manufacturers had been reporting a 6-months aged R-Value value, but
beginning in 2003 have adopted a LTTR method (Long-term Thermal
Resistance). Based upon a method for cutting very thin layers of foam,
this method accelerates the air-diffusion and helps to predict the final R-
value.
As a result of this potentially dramatic lowering effect of outgassing on urethanes R-Value, most companies utilizing urethane insulation in their panels will only refer to urethanes high initial R-Value, while not mentioning the much lower "Aged", or "Long Term" R-Value of urethane.
In general the LTTR values now offered by the industry for urethane insulation are:
urethane thickness initial r-value long term r-value decrease in r-value
1" 8.57 6.00 -30%
1.5" 12.86 9.00 -30%
2" 17.14 12.10 -29%
2.5" 21.43 15.30 -29%
3" 25.71 18.50 -29%
3.5" 30.00 21.70 -28%
4" 34.00 25.00 -26%
In short, the Long Term R-Value for urethane insulation can be as low 6.25 per inch.
Please verify this for yourself by clicking the link below to the State of Colorado's Energy conservation information website.
Look in the R-Value Table for Insulating Materials next to "Polyurethane (foamed-in-place)"
http://coloradoenergy.org/procorner/stuff/r-values.htm
COMPARE TO 6" EXPANDED POLYSTSYRENE: (E.P.S.)
E.P.S. thickness initial r-value long term r-value decrease in r-value
6" 27.30 26.00 -4.8%
Our walk in coolers and walk in freezers feature as standard equipment:
* Standard Acrylic coated Galvalume or Aluminum panel finishes.
(Galvalume has all the strength of galvanized steel but is twelve times more corrosion resistant than G60 galvanized steel, and six times more than G90.)
* Featuring, Copeland™, HeatCraft™, and KeepRight™ refrigeration
* Standard 8' exterior height. (unless otherwise noted)
* Heavy duty, 6" thick, no-wood construction polystyrene insulated
panels or 4" thick no-wood construction High Density EPS insulated panels.
* Standard N.S.F. approved Heavy-Gauge insulated Aluminum flooring, or
optional Stainless Steel flooring.
* U.L. approved 34"W x 76"H entrance door with safety latch is standard
* Interior light with external switch
* Thermometer
* Steel cam lock pins
Warranty:
* Panels are warranted for from 5 to 15 years depending on type.
* The compressor comes with a 5 year manufacturers warranty.
(Please Note: Other companies do not include the manufacturers 5 year extended compressor warranty in the price you see. They will charge you hundreds of dollars extra for this. Please make sure and ask them exactly how much more they are going to charge you for this!)
* Other refrigeration components come with a 1 year manufacturers
warranty
Warranties are for parts only and do not cover labor.
Shelving packages are available for our urethane insulated models
An example of sizes for Quick Ship coolers are listed below. Please contact us for pricing on combination or custom sized units.
* Installation available in most states.
FREE DELIVERY TO ALL STATES EXCEPT ALASKA AND HAWAII!
COMPARE THIS TO OUR COMPETITORS WHO CHARGE EXTRA FOR DELIVERY. ADDING FROM HUNDREDS, TO THOUSANDS OF DOLLARS
EXTRA TO YOUR COST!
BELOW ARE JUST A FEW OF OUR STANDARD SIZES.
For Do It Yourself Refrigeration
CALL NOW FOR PRICES! 800-679-9210
WE CAN MAKE ANY SIZE YOU NEED, NOT JUST THE SIZES LISTED HERE!
EXAMPLES OF OTHER SIZES LISTED BELOW.
Call Today For The Best Prices In The Industry!
TOLL FREE 800-679-9210
INDOOR WALK IN FREEZERS
(walk-in freezers require a floor unless on an insulated slab)
|
Dimensions |
Size In
Square Feet |
Compressor
Horsepower
Rating |
With Heavy Gauge Aluminum
Flooring |
With
Stainless
Steel Floor |
|
6' X 6' |
36 |
Call Today! |
Call Today! |
Call Today! |
|
6' x 8' |
48 |
|
|
|
|
6' x 10' |
60 |
|
|
|
|
6' X 12' |
72 |
|
|
|
|
8' X 8' |
64 |
|
|
|
|
8' x 10' |
80 |
|
|
|
|
8' x 14' |
112 |
|
|
|
|
8' x 16' |
128 |
|
|
|
|
10' x 10' |
100 |
|
|
|
|
10' x 12' |
120 |
|
|
|
|
10' x 14' |
140 |
|
|
|
|
12' x 12' |
144 |
|
|
|
|
12' x 16' |
192 |
|
|
|
|
12' x 17' |
204 |
|
|
|
|
12' x 18' |
216 |
|
|
|
|
|
|
|
|
|
THESE ARE JUST A FEW OF OUR STANDARD SIZES, MANY OTHERS AVAILABLE
CUSTOM SIZES AND SHAPES ALSO AVAILABLE!
|