|
ALL COMPONENTS MEET OR EXCEED THE NEW DEPARTMENT OF ENERGY SPECIFICATIONS WHICH TOOK EFFECT NATIONWIDE 0N JAN 1st, 2009.
LOOKING FOR A USED WALK-IN FREEZER OR COOLER? WHY?
YOU'VE JUST FOUND C & D EQUIPMENT L.L.C..
WE OFFER THE HIGHEST QUALITY ALL NEW EQUIPMENT AT PRICES THAT RIVAL USED EQUIPMENT.
DON'T LET YOUR MONEY GO TO COMMISIONS FOR OTHER COMPANIES HIGH PRESSURE SALESMEN AND THEIR MULTIPLE LEVEL SALES ORGANIZATION.
THE OTHER GUYS PROMISE NO HARD SELL AND THEN CALL YOU FIVE TIMES A DAY. WHAT'S UP WITH THAT?
CALL 1-800-679-9210 FOR A FREE QUOTE AND FIND OUT WHAT THE
C & D DIFFERENCE IS FOR YOURSELF.
WHILE WE BELIEVE THAT THE BEST VALUE FOR THE DOLLAR IS WITH EXTRUDED POLYSTYRENE INSULATED PANELS. FOR OUR CUSTOMERS WHO PREFER URETHANE INSULATED PANELS
WE NOW OFFER 4" AND 5" HIGH DENSITY RAIL FRAME CONSTRUCTION, FOAMED IN PLACE CLASS 1 URETHANE INSULATED PANELS.
IS YOUR HEAD SPINNING TRYING TO DECIDE BETWEEN EXTRUDED POLYSTYRENE OR URETHANE?
AT C & D EQUIPMENT YOU HAVE THE CHOICE.
High Density Rail:
In this type of panel, the frame is composed of high density (over 8lb per square ft) urethane "boards". The density of urethane used in the insulating portion of a urethane insulated panel is about 2.2 lbs per board foot.
In this type of panel you have the high structural strength of a wood framed panel, as compared to a frameless "foamed in place" urethane insulated panel without sacrificing the insulating value of the panel as with wood frame construction.
Another advantage is that High Density Rail panels are not subject to rot as wood framed panels are.
ARE YOU PLANNING ON STORING YOUR FOOD AT 70 DEGREES FAHRENHEIT? NO?
WE DIDN'T THINK YOU WOULD. THAT IS WHY WE USE DOW BRAND, HIGH R XPS.
MOST INSULATING MATERIALS R-VALUES ARE COMMONLY REFERRED TO AT TEST TEMPERATURES USED IN THE HOME CONSTRUCTION INDUSTRY FOR INSULATING INTERIOR WALLS OF HOMES.
THIS FIGURE IS MIS-LEADING FOR A WALK-IN COOLER OR WALK IN FREEZER APPLICATION, BECAUSE OF COURSE WALK IN COOLER WALLS ARE USUALLY AT 35F, AND WALKIN FREEZER WALLS ARE AT 0F OR LOWER, NOT 70F LIKE THE INTERIOR OF A HOME.
BELOW IS THE THERMAL RESISTANCE PROFILE OF OUR HIGH R XPS INSULATION AT DIFFERENT TEMPERATURES.
AT 70F / R-5 PER INCH (4 INCH PANEL R-20)
AT 55F / R-7.2 PER INCH (4 INCH PANEL R-28.8)
AT 35F / R-7.7 PER INCH (4 INCH PANEL R-30.8)
AT 25F / R-8.1 PER INCH (4 INCH PANEL R-32.4)
UNLIKE URETHANE, OUR INSULATION PERFORMS BETTER AT TEMPERATURES USED IN THE REAL WORLD
FOR WALK-IN COOLER AND WALK IN FREEZER APPLICATIONS
Whole panel R-Values for our panels is R-32.4 (at 25F)
AND EVEN BETTER AT 0F)
(Unlike our competitors 3.5" wooden framed panels where R-29 only applies to the center of the panel AND THE FRAME IS ONLY R-5) (due to pressure from wood frame panel manufacturers the R-value of the wood framing was exempted from E.I.S.A. energy requirements)
ALL 4" OF OUR PANELS INSULATION FOR BOTH COOLERS AND FREEZERS IS HIGH R-VALUE XPS (HIGH R-VALUE EXTRUDED POLYTYRENE).
SOME OF OUR COMPETITORS THAT TOUT THEIR USE OF EXTRUDED POLYSTYRENE (XPS) USE ONLY 3" OF XPS AND 1" OF LOW DENSITY EXPANDED POLYSTYRENE (AS USED IN COFFEE CUPS) SANDWICHED TOGETHER FOR THEIR COOLERS, AND ONLY USE A SOLID 4" OF EXTRUDED POLYSTYRENE FOR THEIR FREEZER PANELS.
WITH C & D EQUIPMENT WE USE ONLY A SOLID 4" OF HIGH R XPS FOR BOTH OUR COOLER AND FREEZER PANELS!
THE ONLY THING "PREMIUM" ABOUT THE OTHER GUYS WALK IN COOLERS AND WALK IN FREEZERS IS THE PRICE YOU PAY.
AT C & D EQUIPMENT WE HELP YOU PROTECT YOUR INVESTMENT FREE OF CHARGE!
THE ENTRANCE DOOR IS THE MOST USED, AND OFTEN TIMES THE MOST ABUSED PART OF ANY WALK IN COOLER OR FREEZER.
AT C & D EQUIPMENT ALL OF OUR WALK IN COOLERS AND FREEZERS WILL INCLUDE A 36" HIGH, ALUMINUM DIAMOND KICK PLATE ON YOUR CHOICE OF EITHER THE INTERIOR OR EXTERIOR OF THE ENTRANCE DOOR AT NO EXTRA COST TO YOU FOR THIS IMPORTANT FEATURE!
Outdoor Coolers And Freezers
CORROSION RESISTANCE IS OF UTMOST IMPORTANCE IN AN OUTDOOR APPLICATION: DON'T SETTLE FOR LESS THAN THE BEST!
We offer: Standard Acrylic coated Galvalume or Aluminum panel finishes.
(Galvalume has all the strength of galvanized steel but is twelve times more corrosion resistant than G60 galvanized steel, and six times more than G90.
AND OUR ACRYLIC COATING ADDS AN EXTRA LAYER OF PROTECTION!)
NOW FEATURING ON ALL OF OUR REFRIGERATION SYSTEMS FOR COOLERS AND FREEZERS:
ENERGY SAVING E.C. (ELECTRONICALLY COMMUTATED) OR P.S.C., (PERMANENT SPLIT CAPACITOR), MOTORS ON THE REFRIGERATION SYSTEM.
50% TO 60% LESS ENERGY MEANS 50% TO 60% LESS MONEY TO OPERATE!
* Standard Acrylic coated Galvalume finishes. (OUR ACRYLIC COATING MEANS NO RUB-OFF OR SMUDGING!)
(Galvalume has all the strength of galvanized steel but is twelve times more corrosion resistant than G-60 grade galvanized steel, and six times more than G-90 grade galvanized steel.)
* Standard Heavy-Duty weather-proof roof membrane.
* Optional Pitched Roofs available in areas with heavy snow loads.
* Optional lock bars.
* Optional monitor and alarm systems.
* ON OUR OUTDOOR MODELS WE USE DURO LASTS EXCLUSIVE WHITE EQUALS "GREEN" WEATHER-PROOF ROOF MEMBRANE. http://www.whiteequalsgreen.com/
SUPERIOR TO OLD FASHIONED PLAIN GREY POLYVINYL CHLORIDE ROOF SYSTEMS OF THE PAST
* 4" THICK HIGH R / XPS (high R-value extruded polystyrene) insulated panels with a natural embossed Acrylic coated Galvalume finish, (Galvalume 6 times more corrosion resistant than our competitors G 90 grade galvanized steel finish).
OUR DOW BRAND HIGH R EXTRUDED POLYSTYRENE IS NOT TO BE CONFUSED WITH EXPANDED POLYSTYRENE AS USED IN COFFEE CUPS, OR WITH STANDARD EXTRUDED POLYSTYRENE WHICH IS ONLY R-5 PER INCH!
OUR COMPETITORS URETHANE INSULATION HAS A HIGHER (BETTER), THERMAL RESISTANCE (R-VALUE), AT HIGHER TEMPERATURES, AND A LOWER (WORSE), THERMAL RESISTANCE (R-VALUE), AS TEMPERATURES DECREASE. MAKING ITS PERFORMANCE IN WALK-IN COOLER AND FREEZER APPLICATIONS LESS EFFECTIVE.
DOW BRAND HIGH R ( HIGH DENSITY) XPS INSULATION HAS A HIGHER (BETTER), THERMAL RESISTANCE, R-VALUE, AT LOWER TEMPERATURES, MAKING IT PERFECT FOR WALK IN COOLER OR FREEZER APPLICATIONS.
AT 35F (COOLER TEMPERTURE) THE R-VALUE IS R-30.8.
AT 25F THE R-VALUE IS R-32.4. AND IS EVEN BETTER AT 0 DEGREES FAHRENHEIT.
(OUR HIGH R XPS INSULATIONS HIGH COMPRESSION STRENGTH, (USED IN INSULATING BUILDING SLABS), MEANS LESS FLOOR DEGRADATION SUCH AS SINKING, AS SEEN WITH URETHANE INSULATED FLOORS)
(Extrudeed polystyrene is not new. it was invented by former Dow research chemist Ottis Ray Mcintire, and first patented in 1944. Since then it has undergone many improvements. Resulting today in Dows High R-Value extruded polystyrene, certified to not only meet, but exceed new Department of Energy, Energy Independence and Security Act (E.I.S.A.) R-Ralue requiremets)
E.I.S.A. requires a minimum R-Value for coolers of R-25, at a 55F test temperature.
Dow's High R XPS exceeds this and is rated at R-29, at a 55F test temperature and an even better R-30.8 at a more realistic test temperature of 35F.
E.I.S.A. requires a minimum R-Value for freezers of R-32, at a 25F test temperature.
Dow's High R XPS exceeds this and is rated at R-32.4 at 25F.
All of our outdoor refrigeration packages come with all necessary expansion valves and solenoids. Our outdoor compressor / condenser units also come with all electrical controls required for outside installation, i.e., headmaster valve, crankcase heater, etc., so that your unit will work properly in all weather conditions, whether 20 below zero with snow and ice in a Minnesota winter, or 120 degrees in an Arizona summer.
Call Today For Pricing! Toll Free 800-679-9210
C & D EQUIPMENTS TOP TWO CLAIMS YOU SHOULD NEVER BELIEVE
(OR HAVE A DAMNED GOOD LAUGH AT!)
1. "I'M AN HONEST POLITICIAN"
2. "OUR INSULATION NEVER LOSES R-VALUE"
Styrofoam is the trademarked name for extruded polystyrene foam, an invention of the Dow Chemical Company that has been in production for more than 50 years.
Nearly anyone who has purchased coffee to go has heard the container being referred to as a Styrofoam cup.
However, extruded polystyrene has never been used to make disposable coffee cups. For that matter, its never been used to make portable picnic coolers either, this is another misconception.
Those products are actually made from expanded polystyrene foam (EPS) NOT EXTRUDED POLYSTYRENE.
Unlike disposable cups and picnic coolers, which are notably white in color and composed of beads packed tightly together, products made from extruded polystyrene are CLOSED CELL,
and typically blue. It is used to make insulation wrap for residential homes, commercial buildings, and plumbing systems.
It is also used in road construction as an insulation layer under pavement to deter the formation of cracks and potholes that occur from seasonal freezing and thawing of the soil beneath.
Urethane could not be used for this purpose because even though it is also closed cell, urethane in constant contact with moisture loses its closed cell properties, this is why you never see
urethane used in any application where it is in constant contact with moisture. | 
