|
Walk In Coolers for Storage

Special Pricing on the following popular sizes!
6' x 6' x 7' 6"H
6' x 8' x 7' 6"H
8' x 8' x 7' 6"H
6' x 10' x 7' 6"H
8' x 10' x 7' 6"H
6' x 12' x 7' 6"H
10' x 10' x 7' 6"H
8' x 12' x 7' 6"H
10' x 12' x 7' 6"H
8' x 14' x 7' 6" H
With flooring or without flooring.
Indoor or outdoor boxes.
All come standard with your choice outdoor remote or Penthouse refrigeration.
MANY OTHER SIZES AVAILABLE!
NOW FEATURING ON ALL OF OUR REMOTE REFRIGERATION SYSTEM COOLERS:
ENERGY SAVING P.S.C., (PERMANENT SPLIT CAPACITOR), MOTORS ON THE ENTIRE REFRIGERATION SYSTEM.
NOT JUST THE CONDENSER, BUT THE EVAPORATOR COIL MOTORS AS WELL.
THEY USE BETWEEN 50% AND 60%LESS ENERGY THAN OUR COMPETITORS NON P.S.C. MOTORS.
50% TO 60% LESS ENERGY MEANS 50% TO 60% LESS MONEY TO OPERATE!
For more on energy saving ideas and the importance of P.S.C. motors in energy saving, please visit the link below:
http://www.wisconsingrocers.com/images/Magazine/Energy%20savings%20spring%2003.pdf#search='permanent%20split%20capacitor%20energy%20saving'
CLICK HERE TO SEE HOW TO CALCULATE YOUR SAVINGS WITH P.S.C. EVAPORATOR COIL FAN MOTORS
ALL PANELS MEET N.S.F. AND U.L. REQUIREMENTS!
Walk in coolers and walk in freezers for storage can be purchased as separate units, or combined as a single unit, with an interior pass-thru door connecting the walk in freezer and walk in cooler sections.
Both walk in coolers and walk in freezers, or combination walk in cooler / walk in freezers, can be designed for either outdoor or indoor installation of the walk in cooler or walk in freezer boxes, as well as either indoor or outdoor refrigeration systems.
Standard system parameters for our walk in coolers are designed to maintain a 35 degree Fahrenheit internal temperature.
Standard system parameters for our walk in freezers are designed to maintain a -10F internal temperature.
The standard size of our entrance doors is 34" x 76", but can be custom made to any size without much extra expense.
Our coolers using no-wood construction 4" thick stable R-value EPS insulated panels can insulate better over the long run than our competitors coolers using 3.5" wood framed "foamed in place" urethane insulated panels.
AND WILL NOT ROT AS WOOD FRAMED PANELS CAN.
Our competitor's quotes will note that their panels use urethane insulation,
and sometimes includes a questionable claimed R-Value.
Urethanes initial R-value per inch is better than polystyrene:
But what they don't tell you is:
1. Their panels overall R-value, or K-factor.
(The wooden frame portion of their panel has an R-value of only
about R-5, which is much lower than the insulating material, which
is only in the middle of the wooden frame.
Meaning that the panels overall R-value or K-factor is far lower than the
insulating material which is only in the center of the panel. In other word
they are leaving out the low R-value of the wooden frame portion of the
panel when making their R-value claim for their panel)
They are telling you only telling you their "foamed in place" urethane
panels initial R-value, not it's "aged R-value" after "outgassing"
has occured.
2. Stability of the R-value: When urethane is manufactured, the cell gas is
mostly blowing agent, (now Pentane or R-134A), with a low thermal
conductivity.
Because the gas in the cells is lighter than air, it is under constant
pressure from the surrounding atmosphere to escape the cells, much as a
balloon filled with Helium would be.
As the lighter than air gas escapes it is replaced by air and moisture, the
enemy of any insulation. As a result, the high initial R-Value of the
urethane insulation drops, thereby substantially reducing its R-value over
time.
This process, and its lowering effect on urethanes R-Value is know as
"Thermal Drift".
This effect is reduced because of the metal skin but still occurs.
Manufacturers had been reporting a 6-months aged R-Value value, but
beginning in 2003 have adopted a LTTR method (Long-term Thermal
Resistance). Based upon a method for cutting very thin layers of foam,
this method accelerates the air-diffusion and helps to predict the final R-
value.
As a result of the potentially dramatic lowering effect of outgassing on "Foamed in Place" urethanes R-Value, most companies utilizing urethane insulation in their panels will only refer to urethanes high initial R-Value, while not mentioning the much lower "Aged", or "Long Term" R-Value of urethane.
In general the LTTR values now offered by the industry for urethane insulation are:
urethane thickness initial r-value long term r-value drop in r-value
1" 8.57 6.00 -30%
1.5" 12.86 9.00 -30%
2" 17.14 12.10 -29%
2.5" 21.43 15.30 -29%
3" 25.71 18.50 -29%
3.5" 30.00 21.70 -28%
4" 34.00 25.00 -26%
COMPARE TO 6" EXPANDED POLYSTSYRENE: (E.P.S.)
E.P.S. thickness initial r-value long term r-value decrease in r-value
6" 27.30 26.00 -4.8%
In short, the Long Term R-Value for urethane insulation is only about 6.25 per inch.
Please verify this for yourself by clicking the link below to the State of Colorado's Energy conservation information website.
Look in the R-Value Table for Insulating Materials next to "Polyurethane (foamed-in-place)"
http://coloradoenergy.org/procorner/stuff/r-values.htm
Our walk in coolers and walk in freezers feature as standard equipment:
* Copeland™ Compressors., and either Turbo Air™, Heatcraft™ or KeepRight™ condensers and evaporator coils
* Standard exterior height is 7' 6" (unless otherwise noted)
* Steel cam lock fasteners
* Your choice of N.S.F. approved flooring. Standard Heavy-Gauge Aluminum or optional Stainless Steel flooring.
* Standard Acrylic coated Galvalume or Aluminum panel finishes.
(Galvalume has all the strength of galvanized steel but is twelve times more corrosion resistant than G60 galvanized steel, and six times more than G90.) Optional White embossed Acrylic coated Galvalume also available.
* Standard outdoor rated refrigeration on on split / remote systems. (can be installed either indoors or outdoors)
* U.L. approved 34" x 76"H, (opening size),entrance door with safety latch is standard.
* Interior light with external switch.
* Thermometer.
Warranty:
* Panels are warrantied from 5 to 15 years depending on type.
* The compressor comes with a 5 year manufacturers parts only limited warranty.
(Please Note: Other companies do not include the manufacturers 5 year extended compressor warranty in the price you see. They will charge you hundreds of dollars extra for this. Please make sure and ask them exactly how much more!)
* Other refrigeration components come with a 1 year manufacturers
parts only limited warranty
Warranties are for parts only and do not cover labor.
FREE DELIVERY TO ALL STATES EXCEPT ALASKA AND HAWAII!
COMPARE THIS TO OUR COMPETITORS WHO CHARGE EXTRA FOR DELIVERY. ADDING FROM HUNDREDS, TO THOUSANDS OF DOLLARS EXTRA TO YOUR COST!
CALL NOW FOR PRICES! 800-679-9210
WE CAN MAKE ANY SIZE YOU NEED, NOT JUST THE SIZES LISTED HERE!
EXAMPLES OF OTHER SIZES LISTED BELOW.
BELOW ARE JUST A FEW OF OUR STANDARD SIZES
CUSTOM SIZES AND SHAPES ALSO AVAILABLE!
For Do It Yourself Refrigeration
Call Today For The Best Prices In The Industry!
Toll Free 800-679-9210
INDOOR AND OUTDOOR WALK IN COOLERS
|
Dimensions |
Size In
Square Feet |
Without Floor
|
With Heavy-Gauge Aluminum Floor |
With
Stainless
Steel Floor |
|
6' x 4' |
24 |
Call Today! |
Call Today! |
Call Today! |
|
6' x 6' |
36 |
|
|
|
|
6' x 8' |
48 |
|
|
|
|
6' x 10' |
60 |
|
|
|
|
8' x 8' |
64 |
|
|
|
|
8' x 10' |
80 |
|
|
|
|
8' x 12' |
96 |
|
|
|
|
8' x 14' |
112 |
|
|
|
|
8' x 16' |
128 |
|
|
|
|
8' x 18' |
144 |
|
|
|
|
10' x 10' |
100 |
|
|
|
|
10' x 12' |
120 |
|
|
|
|
10' x 14' |
140 |
|
|
|
|
10' x 16' |
160 |
|
|
|
|
10' x 20' |
200 |
|
|
|
|
12' x 12' |
144 |
|
|
|
|
12' x 14' |
168 |
|
|
|
|
12' x 20' |
240 |
|
|
|
|
12' X 30' |
360 |
|
|
|
THESE ARE JUST A FEW OF OUR STANDARD SIZES, MANY OTHERS AVAILABLE
CUSTOM SIZES AND SHAPES ALSO AVAILABLE! |