|
Our walk in coolers for beverage display come standard with 30" X 79", (other sizes available), product display doors that feature heated door frames,double-paned, 80% HEAT REFLECTIVE GLASS, not 60% rated like many other companies use, bright fluorescent T-8 lighting, an Argon gas fill between the two panes of glass and 7- 27" deep shelves per door, (deeper shelves and gravity feed shelves are also available), door frames are available in your choice of 6 finishes.
The standard panel finish inside and out is natural embossed ACRYLIC COATED (ACRYLIC COATED MEANS NO RUB OFF OR SMUDGING) Galvalume, the panels can also be had with a U.S.D.A. white embossed finish.
Walk-in beverage display coolers can be purchased with the entire refrigeration package, and entrance and display doors included, or you can purchase only the paneling and doors or refrigeration packages seperately.
Unless otherwise requested, all complete systems are designed to hold the cooler at 35F when the outside ambient temperature is 100F.
All of our beverage display coolers come standard with outdoor refrigeration packages that include all necessary expansion valves and solenoids. Our outdoor compressor / condenser units also come with all electrical controls required for outside installation, i.e., headmaster valve, crankcase heater, etc., so that your unit will work properly in all weather conditions, whether 20 below zero with snow and ice in a Minnesota winter, or 120 degrees in an Arizona summer.
COMPARING TO URETHANE INSULATED PANELS?
Our coolers using no-wood construction 4" thick stable R-
value HIGH R-VALUE (R-30.8 (AT 35F) WHOLE PANEL) EXTRUDED POLYSTYRENE
XPS insulated panels can insulate over 21% better
than coolers using 3.5" wood framed "foamed in place"
urethane insulated panels.
Our competitor's quotes will note that their panels use urethane insulation, and
sometimes make questionable or false claims concerning their panels R-Value.
C & D EQUIPMENTS TOP TWO CLAIMS YOU SHOULD NEVER BELIEVE
(OR HAVE A DAMNED GOOD LAUGH AT!)
1. "I'M AN HONEST POLITICIAN"
2. "OUR INSULATION NEVER LOSES R-VALUE"
Things to consider about urethane insulated panels:
1. Their panels overall R-value, or K-factor.
(The wooden frame portion of their panel has an R-value that is much lower than the
insulating material that is only in the middle of the wooden frame.
Meaning that the panels overall R-value or K-factor is far lower than the insulating
material which is only in the center of the panel. In other word they are leaving out the
low R-value of the wooden frame portion of the panel when making their R-value claim
for the panel)
They are telling you only telling you their "foamed in place" urethane panels initial R-
value, not it's "aged R-value" after "outgassing" has occured.
2. Stability of the R-value: When urethane is manufactured, the cell gas is
mostly blowing agent, (now Pentane or R-134A), with a low thermal
conductivity.
Because the gas in the cells is lighter than air, it is under constant
pressure from the surrounding atmosphere to escape the cells, much as a
balloon filled with Helium would be.
As the lighter than air gas escapes it is replaced by air and moisture, the
enemy of any insulation. As a result, the high initial R-Value of the
urethane insulation drops, thereby substantially reducing its R-value over
time.
This process, and its lowering effect on urethanes R-Value is know as
"Thermal Drift".
This effect is reduced because of the metal skin but still occurs.
Manufacturers had been reporting a 6-months aged R-Value value, but
beginning in 2003 have adopted a LTTR method (Long-term Thermal
Resistance). Based upon a method for cutting very thin layers of foam,
this method accelerates the air-diffusion and helps to predict the final R-
value.
As a result of this potentially dramatic lowering effect of outgassing on urethanes R-Value, most companies utilizing urethane insulation in their panels will only refer to urethanes high initial R-Value, while not mentioning the much lower "Aged", or "Long Term" R-Value of urethane.
In general the LTTR values now offered by the industry for urethane insulation are:
urethane thickness initial r-value long term r-value decrease in r-value
1" 8.57 6.00 -30%
1.5" 12.86 9.00 -30%
2" 17.14 12.10 -29%
2.5" 21.43 15.30 -29%
3" 25.71 18.50 -29%
3.5" 30.00 21.70 -28%
4" 34.00 25.00 -26%
In short, the Long Term R-Value for "Foamed in Place" urethane insulation can be as low as 6.25 per inch.
Please verify this for yourself by clicking the link below to the State of Colorado's
Energy conservation information website.
Look in the R-Value Table for Insulating Materials next to "Polyurethane (foamed-in-place)"
DON'T TAKE OUR WORD, OR THE WORD OF A MANUFACTURER OF "FOAMED IN PLACE URETHANE FOR ITS TRUE R-VALUE.
CHECK AND INDEPENDENT SOURCE LIKE THE STATE OF COLORADO's ENERGY CONSERVATION WEBSITE BELOW.
http://coloradoenergy.org/procorner/stuff/r-values.htm
HOW LOW CAN URETHANES R-VALUE GO?
DONT DO THE URETHANE LIMBO "HOW LOW CAN IT GO"
USE OUR TIME PROVEN, HIGH R-VALUE, 4" XPS INSULTATED PANELS INSTEAD.
WHY PAY MORE FOR URETHANE INSULATED PANELS AND GET LESS?
COMPARE TO OUR 4" HIGH R / XPS (HIGH R-VALUE EXTRUDED POLYSTSYRENE:
OUR DOW™ BRAND HIGH R EXTRUDED POLYSTYRENE. OUR HIGH R XPS IS NOT TO BE CONFUSED WITH EXPANDED POLYSTYRENE AS USED IN COFFEE CUPS, OR WITH STANDARD EXTRUDED POLYSTYRENE WHICH IS ONLY R-5 PER INCH.
OUR PANELS WHOLE PANEL R-VALUE AT 35 DEGREES FAHRENHEIT IS R-30.8
(OUR PANELS DO NOT HAVE A LOW R-VALUE WOODEN FRAME. WOODEN FRAMES ABSORB MOISTURE, WHICH DEGRADES R-VALUE EVEN FURTHER, AND OVER TIME CAN LEAD TO BOTH BLACK MOLD AND ROT, AS WELL AS COMPRESSION AND SINKING OF FLOORS IN COOLERS WITH FLOORS)
(Extrudeed polystyrene is not new. it was invented by former Dow™ research chemist Ottis Ray Mcintire, and first patented in 1944. Since then it has undergone many improvements. Resulting today in Dows™ High R-Value
extruded polystyrene certified to not only meet, but exceed new Department of Energy, Energy Independence and Security Act (E.I.S.A.) R-Ralue requiremets)
E.I.S.A. requires a minimum R-Value for coolers of R-25 at a test temperature of 55F
Dow's™ High R XPS exceeds this and is rated at R-29 at a test temperature of 55F, and R-30.8 at a test temperature of 35F
(On May 3, 2008, Ray McIntyre was posthumously inducted into the National Inventors Hall of Fame, joining nearly
400 Americans who helped elevate the human condition with inventions that transformed lives and future horizons.
Inductees to the Hall include Herbert Henry Dow (founder of The Dow Chemical Company), Henry Ford, Thomas Edison
and Alexander Graham Bell.)
* OUR OUTDOOR REFRIGERATION PACKAGE COMES WITH A 5 YEAR PARTS WARRANTY
ON THE COMPRESSOR, AND A 1 YEAR PARTS WARRANTY ON OTHER REFRIGERATION
COMPONENTS. (Please Note: Other companies may not include the manufacturers 5 year extended compressor warranty in the price you see. They will charge you hundreds of dollars extra for this. Please make sure and ask them exactly how much more!)
* PANELING INSULATION IS WARRANTED FOR 10 YEARS. EXTERIOR FOR 1 YEAR.
* THE DISPLAY DOORS COME WITH A 10 YEAR SEALED GLASS WARRANTY, 15 MONTHS
PARTS AND LABOR ON THE OTHER DISPLAY DOOR COMPONENTS.
PANELS ARE AVAILABLE WITH A EITHER A WHITE OR NATURAL GALVALUME INTERIOR AND EXTERIOR FINISH (NOT INFERIOR PLAIN GALVANIZED, OR G90), AND A REFRIGERATION PACKAGE DESIGNED TO HOLD AT 35 DEGREES FAHRENHEIT AT 100 DEGREE FAHRENHEIT AMBIENT TEMERATURE. PRICES SHOWN ARE WITH OUTSIDE REFRIGERATION SYSTEMS.
FREE SHIPPING TO ALL STATES EXCEPT ALASKA AND HAWAII!
COMPARE THIS TO OUR COMPETITORS WHO CHARGE EXTRA FOR DELIVERY. ADDING FROM HUNDREDS, TO THOUSANDS OF DOLLARS EXTRA TO YOUR COST!
Call Today For The Lowest Prices In The Industry!
TOLL FREE 800-679-9210
BEVERAGE DISPLAY COOLERS
EVERDAY BLOWOUT PRICES!
LARGER STANDARD SIZES
| # Display Doors |
Cooler Length |
8' Deep |
10' Deep |
12' Deep |
|
3 |
9' |
Call Today! |
Call Today! |
Call Today! |
|
4 |
11' 6" |
|
|
|
|
5 |
14' |
|
|
|
|
6 |
16' 6" |
|
|
|
|
7 |
19' |
|
|
|
|
8 |
21' 6" |
|
|
|
|
9 |
24' |
|
|
|
|
10 |
26' 6" |
|
|
|
|
11 |
29' |
|
|
|
|
12 |
32' |
|
|
|
|
13 |
34 6" |
|
|
|
|
14 |
37' |
|
|
|
|
15 |
39' |
|
|
|
|
16 |
42' |
|
|
|
|
17 |
44' 6" |
|
|
|
|
18 |
47' |
|
|
|
|
19 |
49' 6" |
|
|
|
|
20 |
52' |
|
|
|
|
|
|
|
|
|
CUSTOM SIZES AND SHAPES ALSO AVAILABLE!
OUR PACKAGE PRICES INCLUDE:
PANELS
* Steel cam locks
* 8' HIGH WALL PANELS, ( unless otherwise noted ), ( CUSTOM SIZES ALSO AVAILABLE )
* 4" HIGH R / XPS INSULATION ( unless otherwise noted )
* STANDARD NATURAL EMBOSSED ACRYLIC COATED GALVALUME INTERIOR AND EXTERIOR FINISH
(OPTIONAL WHITE AND BLACK ALSO AVAILABLE)
* 36" X 76" U.L. APPROVED ENTRANCE DOOR
* 10 YEAR PANEL INSULATION WARRANTY. 1 YEAR WARRANTY ON EXTERIOR.
ENTRANCE DOOR
* 36" x 76" U.L. APPROVED, FLUSH FITTING ENTRANCE DOOR WITH SAFETY LATCH IS STANDARD!
GLASS DISPLAY DOORS
* ANTHONY™ OR GEMTRON™ DISPLAY DOORS ( 30 1/4" X 79" ), ( unless otherwise noted )
* HIGH OUTPUT T-8 FLOURESCENT PRODUCT DISPLAY LIGHTS
* 7-, 27" DEEP WIRE SHELVES PER DOOR, WITH TAG MOULDING.
( OTHER DEPTHS, AND GRAVITY FEED SHELVING IS ALSO AVAILABLE )
* 10 YEAR SEALED GLASS WARRANTY, AND 15 MONTHS PARTS AND
LABOR WARRANTY ON THE OTHER GLASS DISPLAY DOOR COMPONENTS
OUTDOOR REFRIGERATION SYSTEM
* FEATURING REFRIGERATION BY HEATCRAFT™, TURBO AIR™, AND KEEPRIGHT™!
* COPELAND COMPRESSORS POWERING ALL CONDENSERS UNLESS OTHERWISE SPECIFIED!
* OVERSIZED EVAPORATOR COIL(S) TO REDUCE ICE BUILD-UP
* OUTDOOR WEATHER HOOD TO PROTECT THE COMPRESSOR
* COMES WITH ALL NECESSARY EXPANSION VALVES AND SOLENOIDS
* COMPRESSOR / CONDENSER UNIT COMES WITH ALL ELECTRICAL CONTROL
COMPONENTS REQUIRED FOR OUTDOOR INSTALLATION ( I.E., HEADMASTER VALVE,
CRANCKCASE HEATER ETC )
*5 YEAR COMPRESSOR WARRANTY, AND 1 YEAR PARTS WARRANTY ON OTHER
COMPONENTS
Styrofoam™ is the trademarked name for extruded polystyrene foam, an invention of the Dow Chemical Company that has been in production for more than 50 years.
Nearly anyone who has purchased coffee “to go” has heard the container being referred to as a Styrofoam™ cup.
However, extruded polystyrene has never been used to make disposable coffee cups.
For that matter, it’s never been used to make portable picnic coolers either, this is another misconception.
Those products are actually made from expanded polystyrene foam (EPS) NOT EXTRUDED POLYSTYRENE.
Unlike disposable cups and picnic coolers, which are notably white in color and composed of beads packed tightly together, products made from extruded polystyrene are CLOSED CELL,
and typically blue. It is used to make insulation wrap for residential homes, commercial buildings, and plumbing systems.
It is also used in road construction as an insulation layer under pavement to deter the formation of cracks and potholes that occur from seasonal freezing and thawing of the soil beneath.
Urethane could not be used for this purpose because even though it is also closed cell, urethane in constant contact with moisture loses its closed cell properties, this is why you never see
urethane used in any application where it is in constant contact with moisture.
| 
