PERFECT FOR THE SMALL FLORAL BUSINESS. NO REFRIGERATION TECHNICIAN NEEDED FOR INSTALLATION. REFRIGERATION UNIT IS "PLUG AND PLAY".   FEATURE IMROVEMENTS:   1. FACTORY ASSEMBLED REFRIGERATION SYSTEM!   2. NO PIPING OR LOOSE COMPONENENTS TO INSTALL!   3. FULLY CHARGED AND TESTED!   4. ATTACHED POWER CORD ON MOST MODELS! MOST MODLES PLUG INTO A STANDARD 115 volt HOME OUTLET.   5. COMES WITH AN ADJUSTABLE DIGITAL TEMERATURE CONTROLLER!   6. MOUNTS FLUSH WITH TOP OF CEILING. NO HANG DOWN INSIDE OF COOLER OR FREEZER!   7. PANELS MEET N.S.F. (NATIONAL SANITATION FOUNDATION), AND U.L. (UNDERWRITERS LABORATORIES), REQUIREMENTS!   8. 12 MONTH PARTS AND LABOR WARRANTY ON REFRIGERATION UNIT WITH 5- YEAR PARTS ONLY WARRANTY ON COMPRESSOR!   9. OUR WALKIN FLORAL COOLERS COME STANDARD WITH PLUG AND PLAY LOW VELOCITY, HIGH HUMIDITY PRE-CHARGED REFRIGERATION SYSTEMS. OUR DO IT YOURSELF FLORAL PENTHOUSE REFRIGERATION SYSTEMS ARE FULLY SELF CONTAINED, PRE-CHARGED AND FACTORY TESTED.JUST SET IT ON TOP, AND PLUG IT IN!   10. If you choosing a cooler with insulated flooring, our standard flooring finish is Aluminum, not Galvanized Steel. (Optional Stainless Steel flooring is also available)   11. FREE LARGER SIZE ETHYLENE GAS FILTERS TO PROTECT YOUR FLOWERS. DON'T BELEIVE THE OTHER GUYS THAT DON'T INCLUDE ETHYLENE GAS FILTERS WITH THEIR FLORAL COOLERS WHEN THEY TELL YOU ETHYLENE GAS FILTERS DON'T MATTER. THEY ARE NOT LOOKING OUT FOR YOU, THEY ARE LOOKING OUT FOR THEIR PROFIT MARGIN.   TO READ MORE ABOUT ETHYLENE GAS, AND HOW NOT REMOVING IT DAMAGES YOUR FLOWERS, REDUCES THEIR STORAGE LIFE, HURTS THEIR APPEARANCE AND INCREASES YOUR SPOILAGE LOSSES CLICK THE LINKS BELOW.   PLEASE VISIT: http://www.mindfully.org/Plastic/Ethylene-Gas.htm and http://www.findarticles.com/p/articles/mi_qa3869/is_200405/ai_n9453683 and http://www.foreverfresh.us 12. Standard: Acrylic coated Galvalume panel finish. (Galvalume has all the strength of galvanized steel but is twelve times more corrosion resistant than G60 galvanized steel, and six times more than G90. AND OUR ACRYLIC COATING ADDS AN EXTRA LAYER OF PROTECTION AND MAKES FOR REDUCED SMUDGING AND GREATER EASE OF CLEANING!)   COMPARE TO OUR COMPETITORS USING OLD FASHIONED GALVANIZED STEEL SKINS.   Why pay more and get less? Call Today for a quick quote 800-679-9210

HOW DO YOU MAXIMIZE THE QUALITY OF APPEARANCE AND USABLE LIFE OF YOUR CUT FLOWERS BY THE DESIGN OF THE REFRIGERATION SYSTEM USED IN YOUR WALK-IN?   ANSWER   REDUCING THE FREQUENCY OF AIR FLOW THROUGH THE EVAPORATOR COIL FINS IS THE KEY TO HIGHER RELATIVE HUMIDITY LEVELS IN A WALK IN FLORAL COOLER. WHY?   BECAUSE WHENEVER A REFRIGERATION SYSTEM IS RUNNING, AND AIR INSIDE OF THE COOLER IS BLOWING THROUGH THE COLD EVAPORATOR COIL FINS, THE AIR INSIDE OF THE COOLER IS BEING DEHUMIDIFIED.   BY REDUCING THE THE FREQUENCY THAT AIR INSIDE OF THE COOLER IS PASSING THROUGH THE EVAPORATOR COIL FINS IN A GIVEN TIME, YOU REDUCE THE AMOUNT OF DEHUMIDIFICATION, THEREBY INCREASING THE RELATIVE HUMIDITY INSIDE OF THE COOLER.   THIS CAN BE ACHIEVED BY TWO MEANS.   1. BY USING A LOWER AIR VELOCITY SYSTEM:   FOR EXAMPLE: IF WE WERE TO USE A 1,000 C.F.M. (CUBIC FEET PER MINUTE) AIR FLOW SYSTEM IN A COOLER. AIR INSIDE OF THE COOLER WOULD PASS THROUGH THE EVAPORATOR COILS HALF AS OFTEN IN A GIVEN TIME THAN IF WE WERE TO USE A 2,000 C.F.M. SYSTEM FOR THE SAME COOLER. SINCE THE AIR IS NOT PASSING THROUGH THE EVAPORATOR COIL FINS AS OFTEN, IT IS NOT DEHUMIDIFYING THE AIR AS MUCH, THEREFORE THE AIR INSIDE OF THE COOLER WILL BE AT A HIGHER RELATIVE HUMIDITY BY USING THE LOWER VELOCITY SYSTEM.   2. BY USING A REFRIGERATION SYSTEM WITH A HIGHER B.T.U. RATING:   BY USING A REFRIGERATION SYSTEM WITH A HIGHER B.T.U. RATING, THE REFRIGERATION SYSTEM DOES NOT HAVE TO RUN AS LONG TO COOL THE BO. SINCE THE AIR INSIDE OF THE COOLER DOES NOT PASS THROUGH THE EVAPORATOR COIL FINS AS MANY TIMES, YOU WILL HAVE A HIGHER RELATIVE HUMIDITY INSIDE OF THE COOLER THAN WITH A LOWER B.T.U. SYSTEM.   MANY COMPANIES ARE HESITANT TO PROVIDE THE POTENTIAL BUYER THE REFRIGERATION SYSTEM MANUFACTURERS MODEL # AND MANUFACTURERS SPEC SHEET FOR THE REFRIGERATION PACK THEY ARE QUOTING. AND WILL ONLY REFER TO MEANINGLESS CLAIMED"HORSEPOWER" RATINGS, WITHOUT PROVIDING YOU WITH A MANUFACTURERS SPEC SHEET TO BACK UP THERE CLAIMS.   REMEMBER, WHEN COMPARING B.T.U. RATINGS ALWAYS MAKE SURE THAT THE "AMBIENT" AND "ROOM" TEMPERATURES ARE THE SAME SO THAT YOU CAN MAKE AN ACCURATE COMPARISSON.

WE USE LOW VELOCITY EVAPORATOR COILS IN ALL OF OUR WALKIN FLORAL COOLERS!

WE USE LOW VELOCITY EVAPORATOR COILS IN ALL OF OUR WALK IN FLORAL COOLERS! 

When comparing prices, make sure that you are being quoted "Low Velocity" evaporator coils.

Low-Velocity coils reduce the rate of drying air- flow and help maintain the higher humidity levels that your plants and flowers need to maintain their appearance longer.

Low Velocity coils are more expensive, and some companies take advantage of the consumers lack of knowledge to pad their profit margins BY USING MEDIUM VELOCITY EVAPORATOR COILS.

If the cooler panels do not cam-lock together, but bolt together, the cooler is probably not using a low velocity coil.

Even on cam lock panel coolers, many companies are using the less expensive medium velocity coils.

If you are told that the coils are low velocity, ask for a make and model # and call us to verify for you whether they are or not.

Many companies become very evasive when asked this simple question. Ask yourself why!